Knee Arthroscopy Implants

Product Details:

New CL construct
Continuous loop of suture braid eliminates the need for knot tying and allows for a larger portion of graft to reside in the tunnel.

Efficient
Preloaded with braided sutures (#7 Biofiber, white-blue as Pulling/leading suture and #5 polyester, green as Flipping suture)for added procedure efficiency.

Greater strength
Tested for UTS-Ultimate Tensile Strength. Meets or exceeds 2200 N. Highest failure load compared to competitive technologies.

Accommodates various graft lengths
One size titanium button is available with multiple pre-measured loop sizes of 12, 15, 20, 25, 30, 35, 40mm lengths.

Truly endoscopic procedure
Does not require a second incision.

Solid fixation for either primary or auxiliary fixation in ACL or PCL reconstruction.

Clinically Proven
Supported by over 100000 cases of clinical success all over India and abroad.

Promotes insertion site healing
Rests on the cortical bone surface.

Strong cortical fixation
Provides dependable fixation regardless of cancellous bone quality.

Provides tactile "flipping" feedback
Ensures proper seating of device.

Hassle-free revision surgeries
Standard technique allows for arthroscopic revision without lateral incision and bone removal.

Most comprehensive line of femoral fixation solutions
Can be used in Single-Bundle soft tissue fixation; Double-Bundle soft tissue fixation; Bone-Tendon-Bone fixation.

Additional Information:

• Item Code: BAK-7001C.12BAK-7001C.15BAK-7001C.20BAK-7001C.25BAK-7001C.30
• Packaging Details: Single Sterile Pack

Product Details:

·         Specifically designed for endoscopic femoral fixation where graft protection is needed.

·         Polished, fully radiused threads provide maximum graft protection.

·         Wide-bore cannulation for easy guide wire insertion and removal.

·         The Taper-Tip style offers sharper initiating threads and a more pronounced taper for faster, easier insertion.

·         Designed to reduce the possibility of bone plug migration during placement.

·         Round head reduces possibility of graft damage during or after implantation.

·         Universal screw for either tibial or femoral applications.

·         Standard 4.5mm hex for easy insertion and removal.

·         Cannulated for use with a guide wire.

·         Material -Titanium alloy.

Additional Information:

• Packaging Details: Single Sterile Pack

·         The low-profile screw and washer combination provides 31% to 50% lower profile than competitive versions.

·         Low profile cancellous screw and spiked washer set provide continuous strength for soft tissue fixation to bone.

·         Low profile head to reduce soft tissue irritation.

·         Can be used as a post screw for suture or soft tissue fixation.

·         Ideal for ACL, PCL, collateral ligament or posteriolateral reconstruction.

·         Unique washer design with spikes on the inferior surface provides excellent fixation of soft tissue to bone.

·         Low profile cancellous screws available in diameter 4.0mm and 6.5mm. Spiked washers also available in small and large size accordingly.

·         Material -Titanium alloy.

Used to securely trap attached sutures and bulky suture knots atraumatically under the low-profile head to eliminate soft tissue irritation.

·         Available in diameter 6.5mm and lengths 30,35 and 40mm

·         Material-Titanium alloy.

Additional Information:

• Item Code: BAK-7011.30SBAK-7011.35SBAK-7011.40S
• Minimum Order Quantity: 1 Piece
• Packaging Details: Single Sterile Pack

Product Details:

Biocompatible Interference Resorbable Screw
Biotwin was designed to fulfill two core aims: provide appropriate mechanical properties necessary for ligament reconstruction whilst ensuring a regulated resorption and osteointegration to form architectural bone through hydrolysis*.

Canulated Resorbable Screw Design
The thread is specific to each screw diameter so as to systematically provide the maximum amount of contact between implant and bone.

Additional Information:

• Packaging Details: Single Sterile Pack

·         The staple fixation system provides a simple means of attaching tissue to bone.

·         Low-profile, wide staple base provides better load distribution.

·         Spike-post leg design encourages uninterrupted vascular flow to the underlying tissue.

·         Sharp leg points for easier penetration into cortical bone.

·         Two pronged implant for superior pull out strength.

·         Fixation staples are available in two sizes.

·         Material-Titanium alloy.

Additional Information:

• Item Code: BAK-7013SBAK-7015S
• Minimum Order Quantity: 1 Piece
• Packaging Details: Single Sterile Pack

·         Used for tibial fixation of the ACL and PCL graft.

·         Indirect extra-articular fixation of tibial-end of the graft.

·         Available in round hole.

·         Material -Titanium alloy.

Additional Information:

• Item Code: BAK-7080S
• Minimum Order Quantity: 1 Piece
• Packaging Details: Single Sterile Pack

The BT-FIX Adjustable Fiber Loop for Attachable Button System is an implant that can be used for cortical fixation with SMARTFIX Tibial base plate over the cortical bone. The BT-FIX Adjustable loop can be used for the tibial fixation in all inside ACL-PCL Reconstruction technique.

The slotted holes of SMARTFIX Tibial base plate can be loaded over the buttonless BT-FIX Adjustable Fiber loop. During procedure, the adjustable loop of the system is passed through the narrow tunnel and the SMARTFIX remains on the cortex which maximizes button to bone contact. The system provides the knotless locking mechanism for strong and stiff graft fixation.

Additional Information:

• Item Code: 10049
• Minimum Order Quantity: 1 Piece
• Packaging Details: Single Sterile Pack

The titanium button is the original endoscopic femoral soft tissue fixation device.

It can be used for single incision, soft tissue, or bone-tendon-bone fixation.

Additional Information:

• Item Code: BAK-7001
• Minimum Order Quantity: 1 Piece
• Packaging Details: Single Sterile Pack

Very strong fixation and unique design for graft protection.

The BUTTONFIX^® Fixation Button with Adjustable Loop provides Leading strength and incorporating a unique design to help protect the graft during loop reduction. Single loop size of BUTTONFIX^® can be universally used with any graft length. The graft support frame protects the graft from damage and any abrasion. UTS-Ultimate Tensile Strength of BUTTONFIX^® is 1300 N.

Features

·         Maximized graft in tunnel

·         Double locking loop mechanism

·         Preloaded with braided sutures (white as pulling suture and green as flipping suture)

·         Requires minimal force to reduce loop

·         Compatible with common extension devices

·         Familiar Loop Reduction Procedure

Additional Information:

• Item Code: BAK-7195
• Minimum Order Quantity: 1 Piece
• Packaging Details: Single Sterile Pack